Wood Stove Door Gasket Kit, 1/2 in x 72 in Fireplace Seal Rope, Gray

1022F Solid-Core Graphite Gasket Rope Unlike hollow or loose-core gaskets that flatten and fail quickly, our solid-core graphite-impregnated fiberglass is denser and more wear-resistant. Resists compression, flattening and fraying delivers seasons of reliable service, not just one season | All-in-One Complete Kit This fireplace door gasket replacement kit includes: 72 inches (6 feet) solid core graphite fiberglass rope (diameter of your choice), high-temp adhesive (SDS available upon request), heavy-duty protective gloves, protective end tapes, and instructions | Wood Stove Glass Rope Selection Guide The fireplace door gasket should be 0.08in larger than the width and depth of the channel. If the channel is wider than it is deep, select the wood stove rope gasket based on the channel width. Always check your stove manual before ordering | Universal Fit Compatible with wood burning stoves, fireplace doors, and hot tent stoves, the length (72 inches) covers most standard door perimeterssimply cut to size with scissors for a custom fit. Detailed instructions walk you through the installan easy weekend project | Step-by-Step Installation Guide Start by removing the door and placing it face-down on a soft surface. Clean the old gasket and adhesive from the channel using a wire brush or scraper until smooth. Pre-cut the new rope by placing it in the channel without glue to measure the exact length do not stretch the rope. Apply high-temp adhesive evenly into the channel, then press the rope firmly into place without stretching. Close the door and allow at least 48 hours of curing time before use. Finally, run the paper test to verify a complete airtight seal