Silent Quartz Clock Movement Kit Long Shaft for 12-14mm Dial, Gold

MUST READ: Measure your panel thickness FIRST. Fits panels 12-14mm thick. Total shaft:22mm/0.87in, Thread:8mm/0.31in. Shoulder height:16mm/0.63in. Thicker than 14mm or thinner than 12mm? Will NOT fit. Use caliper before order | Check hand sizes: Hour hand 83mm/3.27in, Minute hand 113mm/4.45in, Second hand 110mm/4.33in, Second cap 24mm/0.94in. Confirm your original hands have similar lengths and matching mounting hole size. Mismatched hands ,clock stops or runs wrong | Movement body: 56mm wide x 15mm thick. Package includes: Movement, hour hand, minute hand, second hand, second cap, washer & nut. Tip: Keep hour & minute hands parallel. Do NOT over-tighten or use excess pressure | Quiet sweep movement (no ticking). Perfect for DIY quartz wall clocks, cross-stitch clocks, 3D embroidery, craft clocks, frameless draw clocks. Great for bedroom, living room, or office | Before returning double-check these two things: 1, Your panel thickness is 12-14mm 2, Your original hand lengths match: Hour approximately 83mm, Minute approximately 113mm, Second approximately 110mm. If both match, this mechanism will work perfectly