Brixwell Snap-in Tilt Latch, Left, Right Set Plastic Material, White Finish

MATERIAL: Plastic construction provides a molded snap-in housing and latch nose sized for tilt-in sash releases; geometry supports repeatable engagement with the frame pocket and helps limit play when seated in the channel recess during operation | FINISH: White finish matches common interior trim colors and helps blend with sash profiles; molded surfaces maintain their dimensions at contact points so the latch nose and body edges align consistently with the mating window recess during use | DIMENSIONS: Body length 2-1/2", back cutout length 2-3/8", body width 11/16", latch height 7/16", vertical projection of nose 5/16", and nose projection 1/8"; verify against the sash cutout and pocket depth prior to installation for correct fit | USAGE: Insert the body into the sash pocket and press until it snaps flush; confirm the nose projects and retracts smoothly; test tilt-in action to check clearance around the nose and body edges before returning the sash to the operating position. | FUNCTION: Snap-in tilt latch pair enables tilt-in release and secure return of the sash; the spring-loaded nose engages the frame pocket and retracts for tilting, supporting controlled removal from the jamb track during maintenance or cleaning. | INCLUSIONS: Pair includes one left-hand and one right-hand snap-in tilt latch in white plastic; keepers or additional hardware are not included and should be reused or sourced per the window design if replacement of mating components is required | MAINTENANCE: Clean with mild soap and water; avoid solvents that may affect plastic; inspect spring action and nose edges periodically and replace if wear, deformation, or reduced projection interferes with consistent tilt-in latch engagement.