4.92 Ceiling Fan Led Light Replacement 18W 3CCT, Easy Magnetic Mount

DIY Upgrade to Led without Changing the Fixture: No need to change the fixture or the whole light, 5 mins retrofit on lamp to get light back with low cost, brighter than ever, fit for AC 120V USA Circuit | Magentic Mounting, Easy Installation: No need to drill holes nor worry about the screws holes misalign. With 3 strong magnets provided, you can directly attach the led board onto your original metal fixture plate (aluminum or plastic fixture plate is Not applicable) | Versatile Wiring, Connect Live and Neutral Wires: No worries of different connector. The Led Board comes with a 2-prong wire connector with leads that can be soldered to the original 2 cables marked with " " " " from your fan or ceiling light. You can arbitrarily splice the wires (BLUE to L, WHITE to N). If your fixture have extra green Ground wire, just wrap it safely with tape or wire nut since the led board housing is insulated | What you will get: The package contains * , * , * , * 2-prong plug for pigtail wiring to help connect the LED Board with the Black and White Wires coming out of your fan. . in the package | Bright, Energy saving and Eye-protective: The ceiling fan led light kit features with 1800 high lumens, better energy efficiency than traditional incadescent bulb (18w led equals 150w incadescent bulb). Suitable for use in rooms of 75 to 120 square feet. Perfect for bedroom, kitchen, living room, study and dining room | 3CCT Ajustable Color Temperature Memorized: The led pcb panel is equipped with intelligent chips, allowing you to freely switch the light color teperature between 3000K Warm White, 4000K Cool White, 6000K Daylight when you toggle the power switch on and off within 3 seconds or control with remote. The light will remain the last color temperature you set before when you turn it on again | Troubleshoot: (1) make sure you connect AC120V, wrong circuit would electronically damage the led board (2) Make sure the wires are correctly and tightly plugged. Refer to videos showing how to correctly splice the wires: press one end of the wire connector, then push the wire until it goes deep to the bottom, then release and lock the wire. Make sure the wires get in touch with each other. (3) Turn on the power If preceding steps are finished but still failed, please return the item